By default, Raspbian runs from a MicroSD card on your Raspberry Pi. Micro SD card performance in terms of speed and reliability tends to be considerably less than with USB Flash storage. This tutorial will guide you through the process of installing Raspbian on a USB Flash drive from Microsoft Windows. Once you’re done, your Raspberry Pi’s performance will increase considerably.
Tagged: Raspberry Pi 3
In this tutorial, I will go through the steps necessary to create a RAID volume in Raspbian OS on your Raspberry Pi. RAID allows redundant, quick or extended storage depending on which RAID level you go with. I’m going to assume that you’ve followed my previous tutorial on how to install and run Raspbian OS from a USB Flash Drive, although this isn’t necessary.
As we’re using a software RAID controller, we can’t run the OS from our RAID volume, but we can use to for storage. This tutorial is part one of two where we will use our RAID volume for creating our own cloud storage platform using OwnCloud. View the Installing OwnCloud on Raspberry Pi tutorial.
This guide will help you through the steps necessary to install Raspbian (current version at the time of writing, Raspbian Jesse) onto a USB Flash drive from MacOS (OS X) or Linux (ie Ubuntu). You will need a good quality USB Flash Drive, a USB MicroSD card and a Raspberry Pi (I’m using a Raspberry Pi 3 with WiFi).
In this tutorial I’m going to go through the steps to install Apache2 and PHP 7.0 on your Raspberry Pi 3, to create the ultimate low-powered, super quick web server.
I’m going to assume that you have Raspbian installed on your Raspberry Pi 3. For the best results, I recommend running Raspbian from a USB Flash drive rather than a MicroSD card. See my tutorial on how to do this.